Uncovering the Causes of Malfunctions:
Providing Insights for Preventing Recurrence

Forensic engineering · Equipment breakdown
Electrical, mechanical and materials specialists, investigating equipment breakdowns across Canada.
When industrial machinery, commercial equipment or a critical building system breaks down, the questions that follow are about cause and liability: what failed, why, and who is responsible. Mission Critical Forensics provides expert engineering analysis to determine the precise origin and cause of complex equipment failures for clients across Canada. Headquartered in the heart of Toronto, our evidence-based investigations deliver the insight needed to resolve insurance claims, support legal proceedings and prevent costly future incidents.
Equipment breakdown (EB) claims are our daily work, from transformers, switchgear and motors to boilers, chillers, compressors, production lines and control systems. We know how equipment fails, what the evidence of each failure looks like, and how to tell a sudden, accidental breakdown from wear, corrosion, a manufacturing defect or poor maintenance: the distinction most equipment breakdown claims turn on.
01
Multidisciplinary specialists
Electrical, mechanical, controls and materials
02
Systemic
The whole system, not one component
03
Cause, not just condition
A sudden breakdown told apart from wear and defect
04
Independent and defensible
Evidence-based findings and expert testimony
05
Cause, traced to its source
The evidence subrogation and disputes depend on
The challenge
A breakdown often destroys the part that failed first, and the damage spreads to everything around it. Reading what remains takes engineers who know how each kind of equipment works and how it fails, and that is what we are.
When equipment breaks down, the part that failed first is often destroyed by everything that followed: a seized bearing wrecks a shaft, a winding fault burns out a motor, a failed tube floods a boiler. Telling the initiating failure apart from the consequential damage is where experience decides the answer.
A sudden breakdown, gradual wear, corrosion, a manufacturing or design defect, improper installation, poor maintenance and operating error can leave similar evidence. Each has very different consequences for coverage, warranty and liability, and each has to be ruled in or out with evidence.
Modern equipment is electrical, mechanical and digital at once. A motor can fail because of its power supply, a pump because of its controls, a chiller because of a sensor. Finding the true cause takes engineers who understand the whole system, not one discipline.
Control and alarm logs, PLC and building automation data, maintenance and inspection records, OEM manuals and service bulletins, operating history and the accounts of operators and service technicians each hold part of the answer. Interpreting them together with the physical evidence establishes the sequence of events.
Manufacturers, installers, contractors, service providers, owners and operators each see the breakdown from their side, and each may carry liability. The answer has to come from an engineer who answers to the evidence alone, and it has to hold up when insurers, counsel and courts test it.
Capability
All complex loss investigations are led by our group of experienced forensic experts.
Often investigated for personal injury claims.
When you require an unbiased, expert opinion, the qualifications of your engineering partner matter.
An investigation that ends with the cause “undetermined” leaves the claim unresolved. Our technical expertise and holistic approach, which examines the whole system around the breakdown rather than the one component that failed, take each investigation to the bottom of the issue: a definitive root cause.
An equipment breakdown is rarely one party’s problem: manufacturers, installers, contractors, service providers and operators can all be involved. Determining the true root cause, and tracing it to the product, work or operation it came from, gives insurers and counsel the independent technical foundation that loss recovery and subrogation claims depend on. It is what we do best.
As an independent engineering firm, our only objective is to find the scientific truth. Our findings are unbiased and based solely on evidence, making them credible for insurance claims and legal proceedings.
Our team possesses a deep understanding of electrical, mechanical, chemical and materials engineering principles as they apply to equipment and the ways it fails.
Our reports are written to be clear, concise, and defensible. They are structured to withstand the scrutiny of technical and non-technical stakeholders alike.
Questions
It is the forensic engineering work that establishes why a piece of equipment failed, and proves it. A forensic engineer determines what failed first, the sequence of events, whether the cause was a sudden breakdown, wear, corrosion, a defect, the installation, the maintenance or the way it was operated and what it traces to, with findings that hold up for an insurer, a lawyer or a court. Mission Critical Forensics investigates breakdowns of electrical, mechanical, HVAC, control, building, industrial process and fire protection equipment, and of vehicles and mobile equipment, across Canada.
A forensic engineer whose expertise matches the equipment: electrical, mechanical, controls or materials. Mission Critical Forensics (MCF) investigates equipment breakdown (EB) claims across Canada for insurers, adjusters and counsel, from transformers, switchgear and motors to boilers, chillers, compressors and production lines.
It is often the question an equipment breakdown claim turns on. A sudden, accidental failure, gradual deterioration, a manufacturing defect and a maintenance or operating failure can look alike once the equipment has failed. Telling them apart takes engineering evidence: the physical failure itself, read together with the equipment’s operating and maintenance history.
For new or recently serviced equipment, the answer depends on why it failed: a manufacturing or installation defect points one way, an external cause or an operating event another. Establishing the root cause is what answers it, and it often decides who pays.
As soon as the breakdown happens, and before the equipment is repaired, replaced, scrapped or returned to the manufacturer. Evidence lost in the first days cannot be recovered, and it often decides the claim.
Yes. We are frequently retained to provide impartial, third-party engineering analysis for insurance claims, warranty claims, subrogation and litigation. Our engineers can serve as expert witnesses when required.
Electrical power and distribution equipment; motors, engines, turbines and compressors; HVAC and building systems, including boilers, chillers, cooling towers, elevators and escalators; control systems, PLCs and building automation; industrial and process equipment; fire protection systems; plumbing and water systems; appliances; vehicles and mobile equipment; and the materials and components inside them.
Insurers and adjusters, subrogation and defence counsel, utilities, and the owners and operators of industrial, commercial and data centre facilities.
From the Forensic Engineer’s Desk
We use necessary cookies to operate the site. With your consent, we use Google Analytics to understand how pages are used. We do not use advertising cookies.
NecessaryRemembers your choice and protects our forms.Always on